Desma 22 :: Form

Wire armature.

Sculpey molded onto armature.

Sanding.

Sculpture after being baked and sanded.

Mold of the “Y” sculpture.

Mold.

After pouring silicone into mold.

Removing top half of cast after second pouring.

Final cast after trimming (good side).

Cut out felt square.

Folding square inward on all sides.

Inserting glue along edges.

Squeezed edges inward to create shape.

Cutting off bottom edge to make it straight.

Bottom cut off.

Make more, and glue them to the matte board.

Final Felt Project.

Cut out rectangle of felt.

Applying glue.

Gluing edge.

Cut off edge to make it straight.

Cutting into folded edge.

Finish cutting.

Make more and glue them onto matte board.

Final felt piece.

Beginning to make small cuts into paper.

Making small cuts in to paper.

Folding the paper.

More folding.

Final paper piece minus the matte board.

Fold a square piece of paper.

Continuing to make folds.

Continuing to make smaller folds.

Folding the paper up completly.

While it the paper is folded up completly,  fold up more the strip diagonally, and unfold.

Folding the paper so inward then outward.

Finished paper piece.

Paper.

Folding paper in half.

Continuing to make folds.

Making folds in the other direction.

Making more small folds.

Making smaller folds in the other direction.

Finish making smaller folds.

Folding all folds.

Final paper piece.

Cutting strips into the paper.

More strips.

Making sure all strips are seperated.

Attaching it to one side of the matte board.

Attaching to other side of matte board.

Inserting a strips of paper to create the structure.

Inserting more strips of paper.

Final paper piece.