Final project: Toy

1. Create the frame for the sculpey Y using wire.

2. Sculpt, bake, and sand sculpey “positive Y” for casting.

3.  When the Silputty mold cures, cut open the top 1/3.

4. Prepare the mold by coating the inside with wax and vaseline.

5. Pour silicone. Cast 1/2 of the complete Y.

6. Cut out a small hole on each tip of the legs and embed magnets.

7. Place the silicone Y back into the mold. Cover it with the top 1/3 of the mold and put tapes around. Pour silicone.

8-9. This is a flexible proto-type Y for the Y that could be laid flat, bent, or attached to other Ys to become larger sculpture.

Leave a Reply

You must be logged in to post a comment.